The ink is the basic requirement that a printer must have in order to print anything. If you use a printer on a daily basis, you must know how to change ink cartridges. Let’s have a look at how to change ink cartridge Canon Pixma MG2920. Prepare the new ink cartridges by removing them from the plastic cover and removing the tape. Now, switch on your printer and remove the cover. Open it by pushing the green handle, the cartridges will slide in the middle. Remove the old ink and discard them. Place the new ones in the same slot and gently push it inwards. Close the cover.
Read our other Blogs
how to connect ipad to canon printer wirelessly
how to connect printer to wifi canon
how do I reset my canon printer to factory settings?
If you are facing any technical difficulty, and you wish to find out how to change printer ink Canon, all you are expected to do is to follow the below-mentioned steps:
At first, you are expected to open your Canon Printer’s Access Door; you must open it with the help of a support brace, which is located at the right side of the cover
Now, you must remove the stored ink cartridge from the container, and then you would have to remove the protective tap from the new cartridge
And then, you must proceed to install it
Now, after that, you must move forward the ink cartridge into the empty slot in a way that it stays in contact with the metal faces just inside the slot, and then just after some time, you must release it
Next, you are required to close the access door of your Canon Printer, and then you must wait for some time till the indicator light of your printer blinks
Now, you must take a print test in order to ensure that the ink cartridge is properly changed
You can simply go through the above-stated points in order to find out how to change printer ink Canon, check out the above-stated steps to find an absolute solution.
Greeting,
Rachel Gomez